Smith And Wesson Forums banner
1 - 15 of 15 Posts

·
Registered
Joined
·
3,059 Posts
Looks like a Baer. Very nice! kfjdrfirii
 

·
Registered
Joined
·
1,687 Posts
Discussion Starter · #6 ·
Its a Les Baer. Made in 1998 as a P II with MMC adjustable sights but they were replaced before it came into my posession.

I prefer a fixed sight gun any way.

kfjdrfirii
 

·
Registered
Joined
·
9,504 Posts
That is a beauty Chris, it must be a tack driver, thus your enthusiasm.

The Colt MK IV Series 70 pictured, isn't my most accurate 1911, but it is my favorite. it could be because it saved my Lab from a copperhead bite -
or it could be because the MMC sights are so kind to aging eyes.

Disregard the metal Taylor 28 shot drum magazine and zero in on the sights.
I drifted the rear sight and used 45 hardball to shoot it in, and that is what took care of the copperhead.
 

·
Registered
Joined
·
9,504 Posts
Hi Nframe, The Taylor drum is fun to play with, you wind the spring pressure up until you get positive feed of hardball, and after you find where it feeds reliably, just remember how many clicks. It has a spring release on it, so you can load it and leave it loaded.

The Colt has a nickel finish, I swaped out the hammer for a world war ll checkered type, just looked better than the original.

Hank
 

·
Registered
Joined
·
627 Posts
Nice pistolas!

jvfmn;o
ihjf
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top