Smith And Wesson Forums banner

Slugging a barrel

1413 Views 1 Reply 2 Participants Last post by  jonesy814
Okay, I’m going to try it. When the slug goes through, do I measure the ridges caused by the grooves in the barrel or the hollows caused by the lands? What are expected results/ranges for .357 for revolvers and .308 (for 30-06)
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.