Smith And Wesson Forums banner
1 - 20 of 35 Posts

·
Registered
Joined
·
31,533 Posts
Discussion Starter · #1 ·
I have a few. My GP100, SP101 and my SR9c. All accurate and reliable firearms. Show us whatcha got.

499548
 

·
Registered
Joined
·
20,041 Posts
I have a 41 but as usual, I don't post pictures of ANY of my firearms. You never know who is reading this forum. I prefer to stay below the radar if I can. Nice guns though.
 

·
Registered
Joined
·
10,423 Posts

·
Registered
Joined
·
237 Posts
I've got several, top 3.
4 inch GP100 I bought new in 1993.
499627

Vaquero Bisley 44 mag. I bought at a pawn shop in 96 for $225 according to the receipt.
499628

Finally Blackhawk 30 carbine, I had one on layaway at Walmart but I bought the GP100 instead. I finally found one of these on a local classified site last year.
499629
 

·
Registered
Joined
·
20,041 Posts
Recently picked up a Ruger Wrangler. Danged good single action - accurate and well made by todays standards. Can't complain about the Krylon paint finish, considering the low cost.
I believe they are Cerakoted like my custom rifles are. You can recoat them yourself and cure it in your wife's oven at 250 degrees.
 

·
Registered
Joined
·
304 Posts
I believe they are Cerakoted like my custom rifles are. You can recoat them yourself and cure it in your wife's oven at 250 degrees.
They are cerakoted. I looked at one at my LGS and it was godawful ugly. I spent a little more and got the used Single Six I posted in my last post.
 

·
Registered
Joined
·
27 Posts
First revolver I bought, new a few years ago. TALO GP100 in .357, the unfluted cylinder and the wood grips really got to me.
500186


Other Ruger handgun is a new MKIV Target with the oversized wood laminate grips as well. No pics of it yet though.

I would really like to get one of those BH in .30 carbine though......
 

·
Premium Member
Joined
·
3,122 Posts
A quartet of SA's from top to bottom: .45 Colt Bisley, Old Model BH 357/9mm convertible, .41 Magnum,and a Lipsey .44 Special Flat top.

Yes.... I do love having Bisley style hammers (that I modified to fit) on regular style grip frames.

500187


The DA's... a Speed-Six and SP101 (.32 H&R Mag)

500188


And my Ruger "Grail Gun" that I finally found a few years ago... a Buckeye Sports Blackhawk convertible with .32 H&R Magnum and .32-20 cylinders.

I found another .32 H&R Magnum cylinder on ebay for the same model gun, fitted it to mine and reamed it to .327 Federal Mag.

I wanted to keep the original .32 H&R mag cylinder that's serial numbered to the gun unmolested, while at the same time finding it very difficult to resist not converting it to .327 Fed Mag... finding the other cylinder was a monumental stroke of luck!

500190


500191
 

·
Registered
Joined
·
10,423 Posts
here you go a few 44 magnum, 41 magnum. .22 lr & a Mark 3

thewelshm
 

Attachments

1 - 20 of 35 Posts
Top