Smith And Wesson Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
10,110 Posts
C MORE makes an excellent sight.....

I'm thinking that CLARK used to make a "GRIP MOUNT" that was quite good in the BULLSEYE world? It was a piece of steel that mounted under the left grip, and centered the mount over the bore...

Mayhaps GIL HEBARD stocked them? ??
 

·
Registered
Joined
·
10,110 Posts
Hope some of this might help?
 

·
Registered
Joined
·
10,110 Posts
One last one....

 

·
Registered
Joined
·
46 Posts
Hey TCC.

If your model 41 is drilled and tapped for optics, there is a weaver base (number 62 I believe) that bolts right on and then you can add any optic that you desire. If your model is a rather old model, it probably is not drilled and tapped so you can either get a gunsmith to drill and tap it for a weaver mount (not recommended) or you can get a new barrel that is optic friendly.

Regards,
Cranky
 

·
Premium Member
Joined
·
120 Posts
I have a Clark barrel with an Ultradot. It shoots one ragged hole at 25 yards. My 41 is a 90s model so the factory 7" barrel is tapped for a rail and has a Burris Fast Fire III. I also bought a 5" heavy barrel from Ebay and use the iron sights. All shoot great a lock up tight to the frame.
 
1 - 10 of 10 Posts
Top