Smith And Wesson Forums banner

Looks like a .38 M&P Model

3K views 24 replies 6 participants last post by  SFCamry 
Was made between 1948 and 1952. In 1948, the 4 line "registratus" was implemented. In 1952, the half penny front sight was replaced by a ramp. The serial number should start with a C. Look under the barrel, on the grip frame and on the face of the cylinder for an N stamp. That indicates it was originally nickel out of the factory.
 
  • Like
Reactions: Curt360
A C with 5 digits is either 1948 or 1949. If you can give us the serial XX out the last 3 digits and we may be able to narrow the date down.
 
Can you explain, specifically, why that would be advisable?
Because some folks are uncomfortable posting their whole serial numbers in a public forum and we don't need the last two or three digits to get an approximate ship date. But let's not hijack this thread further with off-topic posts. PM me if you want to argue.
 
  • Like
Reactions: Cliff
Many times a diamond or box was stamped next to the S, especially if the part was replaced or repaired. This is for major parts like barrel, frame, cylinder...
 
  • Like
Reactions: Absalom
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top