Smith And Wesson Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
i found an old inherited s&w not long ago and i'm having trouble finding info on it.

it's in what seems to be the original box, labeled "Hand 32 Ejector", and it's chambered for .32 cal. it's a six-shot, deep blued, mint condition. i haven't been able to find any info concerning year model or value so far, so if anyone could help, i would greatly appreciate it.

thanks!!
-tanner
 

· Registered
Joined
·
275 Posts
First, Welcome to the forum.
Start with the serial number on the bottom butt (grip-handle) and also under the barrel and on the cylinder. That info will give somebody a start at identification. Post that and barrel length from face (front) of cylinder to end of barrel. Post photos if you can. Others will be along to help or assist, right guys/gals?
 

· Registered
Joined
·
8,737 Posts
If posting photos here is a problem {it took me a while to figure it out} feel free to E-Mail them to me and I will post them for you.
[email protected]
Put something like "swampwise 32" in the subject line.
I f you do not care to give the serial, Put three or four X in place of the number {just have the right number of numbers as an extra digit can and does mean alot}
 

· Registered
Joined
·
2,480 Posts
Hi and a hearty welcome, Tanner!
As the others have indicayed, a picture will really aid us in helping your inquiry.
I have a feeling your gun just might be very interesting!
Don
welcome01
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top