Smith And Wesson Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
165 Posts
Hi F4, I just recently bought a basically new in box 469 and it has now become my carry gun. It is a great performer. Send me an e-mail and I'll try and get some pictures from my manual of the take-down procedure. Good luck with your 469, I'll find a picture of mine and post it in a minute, Shoo
Here we go.....
Shoo's as new 469

 

·
Registered
Joined
·
165 Posts
You can try it without the instructions from the manual if you'd like. Remove mag, push slide back until notch in slide (just below Wesson on the left side, see my pic) is lined up with rounded part of take-down lever. From right side, push take down lever pin out the left side. Grab the lever while holding the slide and you should be able to pull it all the way out. Now gently let the slide come forward and gently pull the slide off the front of the frame. Now you can remove the guide rod and spring and then remove the barrel, carry on......
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top