Smith And Wesson Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
3,210 Posts
Shoo pretty much describes the drill... some folks have difficulty determining the exact spot the slide needs to be in order to be able push/pull out the slide lock lever, here's what you're aiming for below.

Use caution while pulling out the lever and don't twist it up and down trying to loosen it while pulling it out, a protrusion on the underside of the lever that sticks through a hole in the frame that engages with the mag follower will easily put nasty scratches in the frame.

I find it easier myself to push on the end of lever pin from the right side of the frame to pop it loose and then pull it out, especially if it's tight.



 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top