They will be asking for a serial number and other markings.
Thank you so very much. Always appreciate solid information.It's not a triplelock, it's a model of 1926 aka a 3rd model or a "Wolf & Klar".
Triplelock
![]()
2nd model
![]()
3rd model
![]()
Sehr Gutt!What delcrossv said. The Triple Lock is easily distinguished by the lack of a divot in the left side recoil shield. The center pin is sprung in the opposite direction and does not need depressing by the recoil shield to close the cylinder. The Second Models are readily distinguished by their lack of an ejector rod shroud which was eliminated due to weight concerns when being carried. The shroud returned on the Third Models many of which shipped to Wolf and Klar in Texas hence their nickname.
Thank you, have a great weekend.What delcrossv said. The Triple Lock is easily distinguished by the lack of a divot in the left side recoil shield. The center pin is sprung in the opposite direction and does not need depressing by the recoil shield to close the cylinder. The Second Models are readily distinguished by their lack of an ejector rod shroud which was eliminated due to weight concerns when being carried. The shroud returned on the Third Models many of which shipped to Wolf and Klar in Texas hence their nickname.
Thank you for your information.It's not a triplelock, it's a model of 1926 aka a 3rd model or a "Wolf & Klar".
Triplelock
![]()
2nd model
![]()
3rd model
![]()
Great post, and the picture reflects my feelings exactly.Here's a little known fact (trivia) that is being forgotten in history........................
As we all know, the full underlug (ejector shroud) that graced the First Model (Triplelock), was eliminated on the Second Model (including 1917s). When the Third Model of 1937, commonly referred to as "Wolf & Klar" (named for a Texas Distributor) was produced, the ejector shroud was re-introduced and many of the old timers of the day erroneously called them "Triplelocks" because the underlug made them look like the First Model (albeit sans the 3rd locking device).
Those old timers are gone now but I remember as a kid, Pop (my Grand Dad) discussing that bit of gun lore/nostalgia over campfire conversations.........BTW, our campfire conversations oft times included various ranch hands (cowboys), couple of beat-up old rodeo riders and several retired southwestern lawmen......all that I was privileged to grow up around (family and friends of Pop & Dad).....
View attachment 608024
Thanks again for your knowledge, & adding to mine! He shoots like a top! I knew I should have taken pictures, next range trip! 15yds. 1” group was the best I accomplished.Nice gun, those stocks look great and are worth a little coin themselves. Enjoy!
Thank you.Nice gun, those stocks look great and are worth a little coin themselves. Enjoy!
That is why I am here with my question. Obviously attempting to learn.Plus the very obvious "triple lock" insert on the lower front right frame, adjacent to the cylinder end of the lower shroud.
John
Thank you, feel fortunate to have ‘seen’ him in the case.I'd be happy to have that on my hip. Very nice.